This series of products can be used alone on the top of the High-rise Building, High Chimney, marking towers (Telecom, GSM, Microwave & TV)，High Pole, Tower Crane, Wind Tubine, etc whose height is between 45m and 105m. When the building is higher than 105m, this series of products can be used with Medium-intensity Type A or high-intensity obstruction light to potentially hazardous obstructions to air traffic flashing red safety light.
1.Stand alone design with integrated photocell, power supply flasher and monitoring
2.Integrated automatic flash synchronisation beam optical design
3.High borosilicate glass material with good thermal stability, high transmittance.
4.Built-in circuit protect LED, extremely reliable and cost saving.
5.Shockproof and corrosion resistant. It can be used in very poor conditions.
6.LED is special red color for Aviation Obstruction Light. Typical LED lifetime is more than 100,000 hours.
7.Resistant to heavy rain or storms.
8.Free maintenance and aluminum alloy Material.
9.Five year warranty
10.low power consumption and low cost of ownership.
2.Light intensity: 2,000cd ±25%
3.Flash rate: Flashing mode (20 to 60 times/minute)
4.Working way of two lights: Main (Duty)-standby way or Two light working at the same time.
5.Light source: LED
6.Service life of LED: ≥100,000hours
7.Operating voltage: AC220V (option voltage,eg.AC120V,AC110V,DC48V)
8.Power consumption: 60W
9.Overall size(mm): Φ236 by 245
10.Installation size(mm): Φ190 by 12
11.Vertical degree: 3°
12. Horizontal degree: 360°
-Housing: High borosilicate glass
-Base: die casting aluminum
15.Emitting color: Aviation red
16.Ambient temperature: -40℃~+60℃
17.Wind load: 80m/s
18. Protection standard:IP67